Trendnet TFC-1600MM Manual

TFC-1600MM Media Conversion System Management Configuring Guide

Management Setting Through Terminal Emulator 2 Main Menu Figure (8) 2-1 System Function There are three items in System Function menu, “Software

To reboot for the software setting. 2-1-2 Factory Reset This function is to set the device back to the default setting in case of the messy setting

2-2 Configuration Figure (11) There are four items in the Configuration menu, “General Configuration, System Configuration, Media Converter Chass

Change Password: the changing of the admit password. Confirm Password: to confirm the setting of admit password. System Name: to authorize the devic

2-2-3 Media Converter Chassis Figure (14) The screen will show out the power status of the chassis system. V stands for “yes” and X stands for “N

2-2-4 Media Converters Figure (15) Indicates the Link, Duplex mode and Speed status of each media converter.

2-3 SNMP Configuration Figure (16) Get Community Name: to get the device community name (default = public). Set Community Name: to set the device

Appendix A When forgot the password Boot up the chassis system and press the escape button repetitious three to four times, then press “root” fo

CONFIGURING THE SYSTEM This chapter provides network managers and system administrators with information about how to configure the Media Converter

Configure through Web browser The Media Converter chassis system is accessible using a Web browser (IE explorer, Netscape Communications, etc.) to

5. The default Login name and password is both “root”. Support SNMP Management The Media Converter Management Module supports SNMP management. LED

for activity. Management Setting Through Web Browser 1 Main Menu Figure (1) Main Menu 1-1 System Function There are four items in System

Figure (2) Configuration 1-1-1 Software Reboot To reboot for the software setting. 1-1-2 Factory Reset This function is to set the device back to

Figure (4) The section is explaining how to upload and download the configure setting of the module. The Configuration Upload is to restore a

1-2-2 General Configuration Figure (6) MAC Address: will show out the MAC address of the device. IP Address: to allocate an IP address for the de

1-2-3 SNMP Configuration Figure (7) Get Community Name: to get the device community name (default = public). Set Community Name: to set the devic