Trendnet Network Router USB 2.0 & IDE Network Storage Enclosure Manual do Utilizador descarregar pdf (Página 4)

2. Hardware Installation

English

1. Remove the two screws from the

rear panel to detach the cover.

2. Make sure the jumper settings on

the hard drive is set to Master.

Note: Before installing the IDE hard drive, the jumper settings must be set to

Master.

4. Place the hard drive onto the metal

bracket and secure it with four

mounting screws.

3. Connect the IDE cable and power

cable to the hard drive.

5. Replace the cover and secure the

two screws.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Trendnet Network Router USB 2.0 & IDE Network Storage Enclosure Manual do Utilizador Página 4