Trendnet TEW-430APB Manual do Utilizador

Copyright ©2004. All Rights Reserved. TRENDware International, Inc. TRENDnetTRENDware, USAWhat's Next in NetworkingTEW-430APBVersion 09.27.04Wi

84. On Radio Settings, click on the change region…3. Enter any AP Name for your Access Point. Create a SSID that your wireless network will be using,

9English5. Select the country you live in and Click OK. For detailed information about the TEW-430APB's configuration and advanced settings, plea

10EnglishFrom a Wireless Computer (Using TRENDnet's TEW-226PC as an example in this section)The default settings of the Access Point are:SSID – d

11English3. Go to the Status section of your Wireless Utility Program. It should show Your wireless PC's connection information to the Access Poi

12English5. To configure the Wireless Settings, click on the Wireless option on the left panel, and select Basic Settings. The settings window will ap

13English8. Select the country you live in and Click OK. For detailed information about the TEW-430APB's configuration and advanced settings, ple

14Technical Support Hours7:00AM ~ 6:00PM, Monday through Friday Pacific Standard Time (except holidays)Contact Technical SupportTelephone: +1-310-626-

Copyright ©2004. All Rights Reserved. TRENDware International, Inc. TRENDnetTRENDware, USAWhat's Next in Networking@Product Warranty Registrati

Table of ContentsEnglish ...Troubleshooting...

Thank you for purchasing TRENDnet's TEW-430APB Wireless G LAN Access Point.This guide will help you set-up your Access Point quickly and easily.

21. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network.2. Connect

33. Configure TCP/IP SettingsBefore the Access Point can be accessed and configured, the computer's TCP/IP settings need to be changed. (That inc

45. Under the IP Address tab, click on Specify an IP address and enter 192.168.1.50 for IP address and 255.255.255.0 for Subnet Mask and click OK.6. C

5Windows 2000/XP1. Find the Start button located on the Desktop.2. Click Start, click Settings, and then click on Control Panel.3. Double-Click the Ne

66. Click on Use the following IP address. Enter 192.168.1.50 for IP address and 255.255.255.0 for Subnet, then click OK.7. Click OK.8. Your computer

74. Configure the Access PointFrom a Wired Computer1. Open a web browser (Internet Explorer or Netscape) and enter http://192.168.1.100 in the address